The REC-558U was designed to squeeze commonly used service entrance connectors, including lugs, sleeves, H-Taps and C-Taps. The rapid advance feature allows the operator quicker compression cycles. In addition to the rapid advance feature, it also has incorporated an electronic counter that will allow a service technician to read the number of compression cycles the tool has made. Also, the new tool housing has been reinforced to improve durability during heavy field use.

A factory pre-set bypass cartridge assures a six ton compression every time. The REC-558U accepts either “W”, “O” or “X” type dies. The D3 nest die comes standard with the tool. Always consult your connector manufacturer for proper die/connector combinations.

The REC-558U will accept the optional 25CAT cutter head attachment. Quick release pins allow the operator to change between compression and cutter head in one minute with no springs or pins to lose.


25CAT–Optional Cutter Head*

*Will not cut ALL 500MCM Copper Cable, consult factory.

25Cat optional cutter head


Product Information

Part Number: REC-558U
Product Type: Crimping tools, Cutting tools
Related Industries: Distribution, Electric utilities, Substation, Transmission

Tonnage: 6 ton
Jaw opening: 1.8"
Weight: 8 lbs. with Battery
Size: 13”L x 12”H x 2.5”W
Operation: Battery powered

REC-558U: Tool Breakdown
REC-558U: Manual and Tool Breakdown
REC-558U: Tool Facts


Materials: Aluminum, Copper, H-Taps
Range
H-Taps Up to 4/0-4/0
Lugs #8-300 MCM Al
Lugs #8-500 MCM Cu
Splices #8-300 MCM Al
Splices #8-500 MCM Cu
Steel – DO NOT CUT

Due to material composition, the ratings are to be used as a guide. For questions regarding a specific material, please contact a Huskie Tools Representative.


Get a QuoteGet a quote from your local Huskie Tools Representative

Related products