CN-258: 6 Ton Compression Tool with Rubber Boot – .95” Jaw Opening CN-258: 6 Ton Compression Tool with Rubber Boot – .95” Jaw Opening
Huskie’s CN-258 is used for service entrance connections up to 4/0, and its bypass cartridge assures all compressions. A two-stage, rapid advance pumping system and threaded collar save compression strokes and time.
CN-58H: 6 Ton Remote Compression C-Head with Rubber Boot – .95” Jaw Opening CN-58H: 6 Ton Remote Compression C-Head with Rubber Boot – .95” Jaw Opening
The CN-58H remote operated “C” head requires an external pumping source of 10,000 psi.
ECO-EZ: 6 Ton Compression Tool with Changeable Head ECO-EZ: 6 Ton Compression Tool with Changeable Head
The ECO-EZ Streamline compression tool has a powerful 6 ton output. When ordering, choose from any of the six available heads that meet your needs which will be installed at the factory. If multiple jaws are needed they can be replaced fairly simply by removing the snap ring on pin. The swivel head design allows the jaws to rotate to 180° for operator convenience.
ECO-EZBG: 6 Ton Compression Tool with Changeable Head ECO-EZBG: 6 Ton Compression Tool with Changeable Head
The ECO-EZBG Streamline compression tool has a powerful 6 ton output. When ordering, choose from any of the six available heads that meet your needs and switch between multiple heads with the pull-pin design.
ECO-EZK: 6 Ton Compression Tool with Changeable Head ECO-EZK: 6 Ton Compression Tool with Changeable Head
The ECO-EZK streamline compression tool has a powerful 6-ton output. When ordering choose from any of the six available heads that meet your needs.
ECO-EZND: 6 Ton Compression Tool with Changeable Head ECO-EZND: 6 Ton Compression Tool with Changeable Head
The ECO-EZND streamline compression tool has a powerful 6-ton output. When ordering chose from any of the six available heads that meet your needs.
ECO-EZO: 6 Ton Compression Tool with Changeable Head ECO-EZO: 6 Ton Compression Tool with Changeable Head
The ECO-EZO streamline compression tool has a powerful 6-ton output. When ordering chose from any of the four available heads that meet your needs.
EP- 430: 12 Ton Compression Tool with Rubber Boot – 1-3/16” Jaw Opening EP- 430: 12 Ton Compression Tool with Rubber Boot – 1-3/16” Jaw Opening
The EP-430 is unique in that it has a large jaw opening of 1-3/16” and is able to splice up to 600 MCM.
EP- 430H: 12 Ton Remote Compression C-Head with Rubber Boot – 1-3/16” Jaw Opening EP- 430H: 12 Ton Remote Compression C-Head with Rubber Boot – 1-3/16” Jaw Opening
The EP-430H is a remote C-head that requires an external 10,000 psi pumping source for operation.
EP-100WD: 100 Ton Compression Head EP-100WD: 100 Ton Compression Head
The EP-100WD is a 100 Ton compression head for full tension, transmission and substation connections and requires an external 10,000 psi, double-acting pumping source. The EP-100WD is even lighter than our previous model, the EP-100WC, by a full 18 pounds.
EP-410: 12 Ton Compression Tool with Rubber Boot –  1” Jaw Opening EP-410: 12 Ton Compression Tool with Rubber Boot – 1” Jaw Opening
The EP-410, hand operated, compression tool features a two stage rapid advance pumping system.
EP-410H: 12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening EP-410H: 12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening
The EP-410H is a traditional C-head with a one-inch jaw opening. It will accept all “U” type dies currently used in 12 ton tools on today’s market.
EP-410HT: 12 Ton Remote Titanium Compression C-Head – 1” Jaw Opening EP-410HT: 12 Ton Remote Titanium Compression C-Head – 1” Jaw Opening
The unique, lightweight titanium head of the EP-410HT reduces its weight to just five pounds.
EP-510C: 12 Ton Compression Tool with Rubber Boot – 1.65” Jaw Opening EP-510C: 12 Ton Compression Tool with Rubber Boot – 1.65” Jaw Opening
Huskie’s EP-510C was engineered to accommodate all U-type dies currently used in existing 12 ton tools.
EP-510HC: 12 Ton Remote Compression C-Head with Rubber Boot – 1.65” Jaw Opening EP-510HC: 12 Ton Remote Compression C-Head with Rubber Boot – 1.65” Jaw Opening
The EP-510HC is a remote C-head that requires an external 10,000 psi pumping source.
EP-510HK: 12 Ton Remote Compression C-Head with Rubber Boot – 1.5” Jaw Opening EP-510HK: 12 Ton Remote Compression C-Head with Rubber Boot – 1.5” Jaw Opening
The EP-510HK is a Kearney style tool which accepts PH-2, WH-2, and WH-3 style dies.
EP-510K: 12 Ton Compression Tool with Rubber Boot – 1.5” Jaw Opening EP-510K: 12 Ton Compression Tool with Rubber Boot – 1.5” Jaw Opening
The Huskie EP-510K was designed to accept Kearney dies commonly used in their models WH-2, PH-2, and WH-3 hydraulic tools.
EP-60D (Steel) – 60 Ton Double Acting Compression Head EP-60D (Steel) – 60 Ton Double Acting Compression Head
The EP-60D series is a double acting model. Double acting tools will eliminate the possibility of the tool jamming.
EP-60DT (Titanium): 60 Ton Double Acting Compression Head EP-60DT (Titanium): 60 Ton Double Acting Compression Head
The EP-60D series is a double acting model. Double acting tools will eliminate the possibility of the tool jamming.
EP-60WA (Steel) – 60 Ton Compression Head EP-60WA (Steel) – 60 Ton Compression Head
The EP-60WA is a single acting, 60 ton press that is designed to compress sleeves and lugs on ACSR and ACAR transmission and distribution cables.
EP-60WT (Titanium) – 60 Ton Compression Head EP-60WT (Titanium) – 60 Ton Compression Head
The EP-60WT is a single acting, 60 ton press that is designed to compress sleeves and lugs on ACSR and ACAR transmission and distribution cables.
EP-610H: 15 Ton Remote Compression C-Head – 2” Jaw Opening EP-610H: 15 Ton Remote Compression C-Head – 2” Jaw Opening
The EP-610H is a remote C-head that requires an external 10,000 psi pumping source.
EP-630A: 6.2 Ton Dieless Crimping Tool –  .9” Jaw Opening EP-630A: 6.2 Ton Dieless Crimping Tool – .9” Jaw Opening
The EP-630A is commonly used by electric utilities and contractors who prefer dieless compression to circumferential compression.
EP-630HA: 6.2 Ton Dieless Remote Crimping Head with Rubber Boot – .9” Jaw Opening EP-630HA: 6.2 Ton Dieless Remote Crimping Head with Rubber Boot – .9” Jaw Opening
The EP-630HA is a dieless remote head that requires an external 10,000 psi pumping source.
EP-750A: 6.2 Ton Flip-Top Dieless Crimping Tool – with 1.5” Jaw Opening EP-750A: 6.2 Ton Flip-Top Dieless Crimping Tool – with 1.5” Jaw Opening
The EP-750A operates the same as the EP-630A, but has a larger connector/ cable capacity.
EP-750HA: 6.2 Ton Flip-Top Dieless Remote Crimping Head – 1.5” Jaw Opening EP-750HA: 6.2 Ton Flip-Top Dieless Remote Crimping Head – 1.5” Jaw Opening
The Huskie EP-750HA dieless, Anderson style head has a flip-top opening and a pull-pin locking mechanism to accept larger connectors up to 750 MCM.
EZBG EZBG
Optional crimping jaw for ECO-EZ tool.
EZK EZK
Optional crimping jaw for ECO-EZ tool.
EZND EZND
Optional crimping jaw for ECO-EZ tool.
EZO EZO
Optional crimping jaw for ECO-EZ tool.
IL-ND: 6 Ton Battery Powered Streamline Compression Tool IL-ND: 6 Ton Battery Powered Streamline Compression Tool
The newly developed IL-ND streamline tool was designed as an upgrade to the ECO-EZ tool giving the user a more robust product with a true 3 year life cycle.
REC-3410: 12 Ton Compression Tool with 1″ Jaw Opening REC-3410: 12 Ton Compression Tool with 1″ Jaw Opening
Huskie Tools is giving you more tool speed and easier handling with our REC-3410 battery powered compression tool. It features a rubber boot and it is designed to accommodate all 12 ton “U” type dies widely used throughout the electrical industry.
REC-3510: 12 Ton Compression Tool with 1.65″ Jaw Opening REC-3510: 12 Ton Compression Tool with 1.65″ Jaw Opening
A built-in, preset 10,000 psi bypass cartridge will audibly bypass when optimal pressure is achieved. Test dies accompanied with our PG-4 can confirm the output pressure when needed.
REC-3510K: 12 Ton Battery Powered Compression Tool REC-3510K: 12 Ton Battery Powered Compression Tool
Huskie's REC-3510K ROBO* battery powered compression tool is designed to accept Kearney WH-2, PH-2, and WH-3 style dies. It has a full 12 ton capacity and its 1.5" jaw opening accepts lugs up to 1033 MCM.
REC-3610: 15 Ton Compression Tool with 2″ Jaw Opening REC-3610: 15 Ton Compression Tool with 2″ Jaw Opening
The REC-3610 is our 15 ton compression tool that is able to crimp splices and lugs up to 1250 MCM aluminum and 1500 MCM copper.
REC-4430: Crimping Tool
The REC-4430 is no longer sold, but service and repair is still available.
REC-458U: Crimping Tool
The REC-458U is no longer sold, but service and repair is still available.
REC-5430: 12 Ton Compression Tool with 1-3/16″ Jaw Opening REC-5430: 12 Ton Compression Tool with 1-3/16″ Jaw Opening
The REC-5430 weighing just 14.75 pounds was specifically designed for use in single-handed operation in overhead applications such as cable trays. This allows one hand to control the work while the other hand is free to operate the tool.
REC-5510: 12 Ton Compression Tool with 1.65″ Jaw Opening REC-5510: 12 Ton Compression Tool with 1.65″ Jaw Opening
The REC-5510 was specifically designed for use in single-handed operation in overhead applications such as cable trays. This allows one hand to control the work while the other hand is free to operate the tool.
REC-5510K: 12 Ton Compression Tool with 1.5″ Jaw Opening REC-5510K: 12 Ton Compression Tool with 1.5″ Jaw Opening
The REC-5510K battery powered compression tool is designed to accept Kearney WH-2, PH-2 and WH-3 style dies. Weighing just 16.5 pounds it was specifically designed for use in single-handed operation in overhead applications such as cable tray.
REC-558U: 6 Ton Compression Tool with 1.8 inch Jaw Opening REC-558U: 6 Ton Compression Tool with 1.8 inch Jaw Opening
The REC-558U was designed to squeeze commonly used service entrance connectors, including lugs, sleeves, H-Taps and C-Taps.
REC-5630: 6.2 Ton Dieless Compression Tool with .90″ Jaw Opening REC-5630: 6.2 Ton Dieless Compression Tool with .90″ Jaw Opening
The REC-5630 is a battery operated, dieless compression tool used to compress Anderson style lugs. Six tons of compression force are achieved when the tool advances and bypasses at the predetermined pressure.
REC-5750: 6.2 Ton Flip-Top Dieless Compression Tool with 1.5″ Jaw Opening REC-5750: 6.2 Ton Flip-Top Dieless Compression Tool with 1.5″ Jaw Opening
The REC-5750 is a flip-top, dieless tool used to crimp cables up to 750 MCM. The flip-top latch opens to allow for easy cable positioning and removal.
REC-5NDSL: 6 Ton Compression Tool with Changeable Head and 1-3/8″ Jaw Opening REC-5NDSL: 6 Ton Compression Tool with Changeable Head and 1-3/8″ Jaw Opening
The REC-5NDSL has a choice of five jaw types, including three compression heads, the SLND-JAW, SLO-JAW, or SLBG-JAW. The SLND-JAW head combines ND and K jaws. Quickly change between head types with the pull-pin design. All jaw types are forged and come standard with brush protection. Users also have the option of switching to the SLCUT-JAW cutting head.
REC-6430: 12 Ton Compression Tool with 1.2″ Jaw Opening REC-6430: 12 Ton Compression Tool with 1.2″ Jaw Opening
The REC-6430 weighing just 11.1 pounds (3 lbs. less than the 5 Series, REC-3430) was specifically designed for use in single-handed operation in overhead applications such as cable trays.
REC-6510: 12 Ton Compression Tool with 1.65″ Jaw Opening REC-6510: 12 Ton Compression Tool with 1.65″ Jaw Opening
The REC-6510 was specifically designed for use in single-handed operation in overhead applications such as cable trays. This allows one hand to control the work while the other hand is free to operate the tool.
REC-6510K: 12 Ton Compression Tool with 1.5″ Jaw Opening REC-6510K: 12 Ton Compression Tool with 1.5″ Jaw Opening
The REC-6510K battery powered compression tool is designed to accept Kearney WH-2, PH-2 and WH-3 style dies. Weighing just 13.5 pounds it was specifically designed for use in single-handed operation in overhead applications such as cable tray. It also eliminates the cumbersome hoses and larger, heavier tools traditionally used in overhead work.
REC-658U: 6 Ton Compression Tool with 1.8 inch Jaw Opening REC-658U: 6 Ton Compression Tool with 1.8 inch Jaw Opening
The REC-658U was designed to squeeze commonly used service entrance connectors, including lugs, sleeves, H-Taps and C-Taps.
REC-6630: 6.2 Ton Dieless Compression Tool with .90″ Jaw Opening REC-6630: 6.2 Ton Dieless Compression Tool with .90″ Jaw Opening
The REC-6630 is a battery operated, dieless compression tool used to compress Anderson style lugs. Six tons of compression force are achieved when the tool advances and bypasses at the predetermined pressure.
REC-6750: 6.2 Ton Flip-Top Dieless Compression Tool with 1.5″ Jaw Opening REC-6750: 6.2 Ton Flip-Top Dieless Compression Tool with 1.5″ Jaw Opening
The REC-6750 is a flip-top, dieless tool used to crimp cables up to 750 MCM. The flip-top latch opens to allow for easy cable positioning and removal.