BP-80TG: Battery Test Gauge BP-80TG: Battery Test Gauge
The BP-80TG is a battery test gauge for the BP-80 Lithium Ion Battery. It is sold as a stand alone accessory.
ECO-500: 6 Ton Battery Powered Cutting Tool ECO-500: 6 Ton Battery Powered Cutting Tool
The ECO-500, which is designed for copper and aluminum conductor only, provides a much cleaner cut then working with non-ACSR conductor.
ECO-EZ: 6 Ton Compression Tool with Changeable Head ECO-EZ: 6 Ton Compression Tool with Changeable Head
The ECO-EZ Streamline compression tool has a powerful 6 ton output. When ordering, choose from any of the six available heads that meet your needs which will be installed at the factory. If multiple jaws are needed they can be replaced fairly simply by removing the snap ring on pin. The swivel head design allows the jaws to rotate to 180° for operator convenience.
IL-ND: 6 Ton Battery Powered Streamline Compression Tool IL-ND: 6 Ton Battery Powered Streamline Compression Tool
The newly developed IL-ND streamline tool was designed as an upgrade to the ECO-EZ tool giving the user a more robust product with a true 3 year life cycle.
REC-54GRB: Gear-Driven Ground Rod Bender REC-54GRB: Gear-Driven Ground Rod Bender
The REC-54GRB is a heavy duty copper ground rod bender, primarily used in substations to ground structures and equipment. 4/0 or other size copper used for typical methods of substation grounding can easily be cut and stolen.
REC-630Y: 6.6 Ton Cutting Tool with 1-3/16” Jaw Opening REC-630Y: 6.6 Ton Cutting Tool with 1-3/16” Jaw Opening
The REC-630Y was designed to cut ACSR cables up to 336 MCM, as well as copper cables up to 500 MCM and aluminum cables up to 1.18” outside diameter.
REC-634YC: 6.6 Ton Cutting Tool with 1-3/8” Jaw Opening REC-634YC: 6.6 Ton Cutting Tool with 1-3/8” Jaw Opening
Large copper cable cutting is finally made easy with the REC-634YC – just pull the trigger and 6.6 tons immediately goes to work for you.
REC-6430: 12 Ton Compression Tool with 1.2″ Jaw Opening REC-6430: 12 Ton Compression Tool with 1.2″ Jaw Opening
The REC-6430 weighing just 11.1 pounds (3 lbs. less than the 5 Series, REC-3430) was specifically designed for use in single-handed operation in overhead applications such as cable trays.
REC-6510: 12 Ton Compression Tool with 1.65″ Jaw Opening REC-6510: 12 Ton Compression Tool with 1.65″ Jaw Opening
The REC-6510 was specifically designed for use in single-handed operation in overhead applications such as cable trays. This allows one hand to control the work while the other hand is free to operate the tool.
REC-6510K: 12 Ton Compression Tool with 1.5″ Jaw Opening REC-6510K: 12 Ton Compression Tool with 1.5″ Jaw Opening
The REC-6510K battery powered compression tool is designed to accept Kearney WH-2, PH-2 and WH-3 style dies. Weighing just 13.5 pounds it was specifically designed for use in single-handed operation in overhead applications such as cable tray. It also eliminates the cumbersome hoses and larger, heavier tools traditionally used in overhead work.
REC-658U: 6 Ton Compression Tool with 1.8 inch Jaw Opening REC-658U: 6 Ton Compression Tool with 1.8 inch Jaw Opening
The REC-658U was designed to squeeze commonly used service entrance connectors, including lugs, sleeves, H-Taps and C-Taps.
REC-660YC: 6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening REC-660YC: 6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening
The REC-660YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2” maximum outside diameter.
REC-6630: 6.2 Ton Dieless Compression Tool with .90″ Jaw Opening REC-6630: 6.2 Ton Dieless Compression Tool with .90″ Jaw Opening
The REC-6630 is a battery operated, dieless compression tool used to compress Anderson style lugs. Six tons of compression force are achieved when the tool advances and bypasses at the predetermined pressure.
REC-6750: 6.2 Ton Flip-Top Dieless Compression Tool with 1.5″ Jaw Opening REC-6750: 6.2 Ton Flip-Top Dieless Compression Tool with 1.5″ Jaw Opening
The REC-6750 is a flip-top, dieless tool used to crimp cables up to 750 MCM. The flip-top latch opens to allow for easy cable positioning and removal.
REC-685YC: 9 Ton Scissor-Type Cutting Tool with 3.3” Jaw Opening REC-685YC: 9 Ton Scissor-Type Cutting Tool with 3.3” Jaw Opening
The REC-685YC is designed to cut copper and aluminum cables as well as lead-sheathed telecommunication cables.
REC-6NDSL: 6 Ton Compression Tool with Changeable Head and 1-3/8″ Jaw Opening REC-6NDSL: 6 Ton Compression Tool with Changeable Head and 1-3/8″ Jaw Opening
The REC-6NDSL has a choice of six jaw types, including three compression heads, the SLND-JAW, SLO-JAW, or SLBG-JAW. The SLND-JAW head combines ND and K jaws.
REC-B105YC: 9 Ton Scissor – Type Cutting Tool REC-B105YC: 9 Ton Scissor – Type Cutting Tool
The REC-B105YC is designed to cut copper and aluminum cables as well as lead-sheathed telecommunication cables. The extremely large jaws and scissortype blades allow for easy cutting of large underground cables. The sidebar handle allows the user to stabilize and balance the tool.
REC-B630Y: 6.6 Ton Cutting Tool with 1-3/16” Jaw Opening REC-B630Y: 6.6 Ton Cutting Tool with 1-3/16” Jaw Opening
The REC-B630Y was designed to cut ACSR cables up to 336 MCM, as well as copper cables up to 500 MCM and aluminum cables up to 1.18” outside diameter.
REC-B634YC: 6.6 Ton Cutting Tool with 1-3/8” Jaw Opening REC-B634YC: 6.6 Ton Cutting Tool with 1-3/8” Jaw Opening
Large copper cable cutting is finally made easy with the REC-B634YC – just pull the trigger and 6.6 tons immediately goes to work for you.
REC-B6430: 12 Ton Compression Tool with 1.2″ Jaw Opening REC-B6430: 12 Ton Compression Tool with 1.2″ Jaw Opening
The REC-B6430 weighing just 11.1 pounds (3 lbs. less than the 5 Series, REC-3430) was specifically designed for use in single-handed operation in overhead applications such as cable trays.
REC-B6510: 12 Ton Compression Tool with 1.65″ Jaw Opening REC-B6510: 12 Ton Compression Tool with 1.65″ Jaw Opening
The REC-B6510 was specifically designed for use in single-handed operation in overhead applications such as cable trays. This allows one hand to control the work while the other hand is free to operate the tool.
REC-B6510K: 12 Ton Compression Tool with 1.5″ Jaw Opening REC-B6510K: 12 Ton Compression Tool with 1.5″ Jaw Opening
The REC-B6510K battery powered compression tool is designed to accept Kearney WH-2, PH-2 and WH-3 style dies. Weighing just 13.5 pounds it was specifically designed for use in single-handed operation in overhead applications such as cable tray. It also eliminates the cumbersome hoses and larger, heavier tools traditionally used in overhead work.
REC-B658U: 6 Ton Compression Tool with 1.8 inch Jaw Opening REC-B658U: 6 Ton Compression Tool with 1.8 inch Jaw Opening
The REC-B658U was designed to squeeze commonly used service entrance connectors, including lugs, sleeves, H-Taps and C-Taps.
REC-B660YC: 6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening REC-B660YC: 6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening
The REC-B660YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2” maximum outside diameter.
REC-B6630: 6.2 Ton Dieless Compression Tool with .90″ Jaw Opening REC-B6630: 6.2 Ton Dieless Compression Tool with .90″ Jaw Opening
The REC-6630 is a battery operated, dieless compression tool used to compress Anderson style lugs. Six tons of compression force are achieved when the tool advances and bypasses at the predetermined pressure.
REC-B6750: 6.2 Ton Flip-Top Dieless Compression Tool with 1.5″ Jaw Opening REC-B6750: 6.2 Ton Flip-Top Dieless Compression Tool with 1.5″ Jaw Opening
The REC-B6750 is a flip-top, dieless tool used to crimp cables up to 750 MCM. The flip-top latch opens to allow for easy cable positioning and removal.
REC-B6NDSL: 6 Ton Compression Tool with Changeable Head and 1-3/8″ Jaw Opening REC-B6NDSL: 6 Ton Compression Tool with Changeable Head and 1-3/8″ Jaw Opening
The REC-B6NDSL has a choice of six jaw types, including three compression heads, the SLND-JAW, SLO-JAW, or SLBG-JAW. The SLND-JAW head combines ND and K jaws.
REC-BCN658: 6 Ton Compression Tool with .95″ Jaw Opening REC-BCN658: 6 Ton Compression Tool with .95″ Jaw Opening
The REC-BCN658 is an open jaw version of the REC-658U latched type tool. The open jaw can easily fit into tight situations where the closing of a jaw latch would be a problem.
REC-CN658: 6 Ton Compression Tool with .95″ Jaw Opening REC-CN658: 6 Ton Compression Tool with .95″ Jaw Opening
The REC-CN658 is an open jaw version of the REC-658U latched type tool. The open jaw can easily fit into tight situations where the closing of a jaw latch would be a problem.
REC-P600: Hydraulic Pump with 360° Swivel Coupler REC-P600: Hydraulic Pump with 360° Swivel Coupler
The REC-P600 not only utilizes a smaller design to fit into tighter spaces, but also has the ability to work off of one or two batteries. The REC-P600 is four pounds lighter than the REC-P1.
REC-P600R: Wireless Remote Controlled Hydraulic Pump REC-P600R: Wireless Remote Controlled Hydraulic Pump
The Huskie REC-P600R is a wireless, remote operated, single acting hydraulic pump. It is our lightest most versatile hydraulic pump.
REC-S620: 6.6 Ton Battery Powered Cutter  with .75” Jaw Opening REC-S620: 6.6 Ton Battery Powered Cutter with .75” Jaw Opening
The REC-S620 was designed to cut the toughest steel used in construction today.
REC-S624CC: 8 Ton Cutting Tool with .95” Jaw Opening REC-S624CC: 8 Ton Cutting Tool with .95” Jaw Opening
The REC-S624CC was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaw, acetylene torches and cable cutters.
REC-S624H: 8 Ton Battery Powered Cutter with .95” Jaw Opening REC-S624H: 8 Ton Battery Powered Cutter with .95” Jaw Opening
The REC-S624H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters.
REC-S640: 8 Ton Cutting Tool with 1.6” Jaw Opening REC-S640: 8 Ton Cutting Tool with 1.6” Jaw Opening
The REC-S640 is designed to cut up to 1590 ACSR and regular guy wires and ground rod up to 5/8”.
REC-SB620: 6.6 Ton Battery Powered Cutter  with .75” Jaw Opening REC-SB620: 6.6 Ton Battery Powered Cutter with .75” Jaw Opening
The REC-S620 was designed to cut the toughest steel used in construction today.
REC-SB624CC: 8 Ton Cutting Tool with .95” Jaw Opening REC-SB624CC: 8 Ton Cutting Tool with .95” Jaw Opening
The REC-SB624CC was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaw, acetylene torches and cable cutters.
REC-SB624H: 8 Ton Battery Powered Cutter with .95” Jaw Opening REC-SB624H: 8 Ton Battery Powered Cutter with .95” Jaw Opening
The REC-SB624H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters.
REC-SB640: 8 Ton Cutting Tool with 1.6” Jaw Opening REC-SB640: 8 Ton Cutting Tool with 1.6” Jaw Opening
The REC-SB640 is designed to cut up to 1590 ACSR and regular guy wires and ground rod up to 5/8”.
REC-Y60ACM: Gear-Driven Cable Cutter with 2.3″ Jaw Opening REC-Y60ACM: Gear-Driven Cable Cutter with 2.3″ Jaw Opening
The REC-Y60ACM was designed to cut stranded copper cables and aluminum. The jaws will accept a maximum of 1500 MCM aluminum.
SL-1000: 12 Ton Streamline Compression Tool SL-1000: 12 Ton Streamline Compression Tool
The SL-1000 is a hand-held, dieless compression tool that is able to crimp connectors up to 1000 MCM copper and 1000 aluminum. The SL-1000 is the first dieless 12 ton streamline compression tool in the industry featuring a latched head design. The dieless indent style crimping head does not require interchangeable crimping dies. The SL-1000 has a release trigger to feather ram for faster crimping cycles and runs off the same Huskie battery that all Huskie Tools use.
SL-510: 12 Ton Streamline Compression Tool SL-510: 12 Ton Streamline Compression Tool
The SL-510 is built on a similar platform as our SL-ND tool, the most robust and versatile streamline tool in the industry. The new SL-510 will deliver 12 tons of compression force, utilizing all industry standard “U” dies. The capacity of the tool is the same as the pistol grip REC-6510, capable of accepting lugs up to 750MCM, and splices up to 600 MCM.
SL-510K: 12 Ton Streamline Compression Tool with “C” Head SL-510K: 12 Ton Streamline Compression Tool with “C” Head
The SL-510K battery powered compression tool is designed to accept Kearney WH-2, PH-2 and WH-3 style dies. Weighing just 13.55 pounds it was specifically designed for use in single-handed operation in overhead applications such as cable trap. It also eliminates the cumbersome hoses and larger, heavier tools traditionally used in overhead work.
SL-610: 15 Ton Streamline Compression Tool SL-610: 15 Ton Streamline Compression Tool
The SL-610 is built on a similar platform as our SL-ND tool, the most robust and versatile streamline tool in the industry. The new SL-610 will deliver 15 tons of compression force, utilizing all industry standard “P” dies. The capacity of the tool is the same as the pistol grip REC-3610, capable of accepting lugs up to 1500MCM copper and 1250MCM aluminum.
SL-95YC: 9 Ton Scissor-Type Cutting Tool SL-95YC: 9 Ton Scissor-Type Cutting Tool
The SL-95YC is designed to cut copper and aluminum cables as well as lead-sheathed telecommunication cables. The extremely large jaws and scissor-type blades allow for easy cutting of large underground cables.
SL-B510: 12 Ton Streamline Compression Tool SL-B510: 12 Ton Streamline Compression Tool
The SL-B510 is the first 12 ton streamline compression tool in the industry. The new SL-B510 will deliver 12 tons of compression force, utilizing all industry standard “U” dies. The capacity of the tool is the same as the pistol grip REC-6510, capable of accepting lugs and splices up to 750 MCM.
SL-B610: 15 Ton Streamline Compression Tool SL-B610: 15 Ton Streamline Compression Tool
The SL-B610 is built on a similar platform as our SL-BND tool, the most robust and versatile streamline tool in the industry. The new SL-B610 will deliver 15 tons of compression force, utilizing all industry standard “P” dies. The capacity of the tool is the same as the pistol grip REC-3610, capable of accepting lugs up to 1500MCM copper and 1250MCM aluminum.
SL-BC510: 12 Ton Streamline Compression Tool with “C” Head SL-BC510: 12 Ton Streamline Compression Tool with “C” Head
The SL-BC510 has all the same features as the SL-510 but replaces the latched head design with a “C” head.
SL-BC610: 15 Ton Streamline Compression Tool SL-BC610: 15 Ton Streamline Compression Tool
he SL-BC610 is built on a similar platform as our SL-ND tool, the most robust and versatile streamline tool in the industry. The new SL-BC610 will deliver 15 tons of compression force, utilizing all industry standard “P” dies. The capacity of the tool is the same as the REC-3610, capable of accepting lugs up to 1500MCM copper and 1250MCM Aluminum. The PU-15 die adapter is available for use with all 12 Ton “U” type dies.
SL-BND: 6 Ton Streamline Compression Tool with 11 Changeable Heads SL-BND: 6 Ton Streamline Compression Tool with 11 Changeable Heads
The SL-BND was developed after listening to feedback from of our customers for a more robust, higher-quality, REC-style streamline tool.