Showing page 1 of 2

25CAT: Optional Cutter Head Attachment for REC-558U

Optional Cutter Head for REC-558U

ECO-500: 6 Ton Battery Powered Cutting Tool

The ECO-500, which is designed for copper and aluminum conductor only, provides a much cleaner cut then working with non-ACSR conductor.

ECO-R13: 6 Ton Battery Powered Cutters

The ECO-R13 is designed to cut the toughest steel used in construction today. This tool can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaw, acetylene torches and cable cutters. The ECO-R13 is designed as a inline style cutter with an open “C” jaw that can cut up to 1/2” rebar The ECO-R13 comes with a Lithium-Ion battery and rapid charger. The cutting blades on this tool can be rotated when dull and replaced as necessary.

PL-S20: Handheld Hydraulic Cutter with Nickel Plating

The PL-S20 is a saltwater resistant, nickel-plated cutter for use in underwater environments. Its recommended uses include: marine nautical cutting, emergency cutting of stainless steel wire rope rigging and hardware, underwater rebar and cable cutting, and yacht mast rod cutting up to 1/2”.

R-750C: Ratchet Cable Cutter

The R-750C has a ratchet mechanism that has been designed to withstand the stress of 750 MCM copper and aluminum cables with a maximum O.D. of 1-3/4.”

RBC-38

Optional cutting jaw for ECO-EZ tool.

REC-430Y: Cutting Tool

The REC-430Y is no longer sold, but service and repair is still available.

REC-460YC: Cutting Tool

The REC-460YC is no longer sold, but service and repair is still available.

REC-50M: Gear-Driven Cable Cutter with 2” Jaw Opening

The REC-50M battery operated slicing tool cuts 2” cable with the touch of a finger. It features a powerful gear reduction motor that pulls a moveable blade through the toughest copper and aluminum cables.

REC-50U: Cutting Tool

The REC-50U is no longer sold, but service and repair is still available. Please see the REC-50M for our upgraded model.

REC-530Y: 6.6 Ton Cutting Tool with 1-3/16” Jaw Opening

The REC-530Y was designed to cut ACSR cables up to 336 MCM, as well as copper cables up to 500 MCM and aluminum cables up to 1.18” outside diameter.

REC-534YC: 6.6 Ton Cutting Tool with 1-3/8” Jaw Opening

Large copper cable cutting is finally made easy with the REC-534YC – just pull the trigger and 6.6 tons immediately goes to work for you.

REC-54: Cutting Tool

The REC-54 is no longer supplied, please see the REC-54M.

REC-54ACM: Gear-Driven Cable Cutter with 2-1/8” Jaw Opening

The REC-54ACM was designed to cut stranded copper cables and aluminum. The jaws will accept a maximum of 1500 MCM aluminum.

REC-54M: Gear-Driven Cable Cutter with Notched Blade and 2-1/8” Jaw Opening

The REC-54M is a heavy duty cable cutter primarily used to cut ACSR. It will cut up to 1590 MCM ACSR* and copper cables up to 750 MCM.

REC-558U: 6 Ton Compression Tool with 1.8 inch Jaw Opening

The REC-558U was designed to squeeze commonly used service entrance connectors, including lugs, sleeves, H-Taps and C-Taps.

REC-560YC: 6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening

The REC-560YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2” maximum outside diameter.

REC-585YC: 9 Ton Scissor-Type Cutting Tool with 3.3” Jaw Opening

The REC-585YC is designed to cut copper and aluminum cables as well as lead-sheathed telecommunication cables.

REC-630Y: 6.6 Ton Cutting Tool with 1-3/16” Jaw Opening

The REC-630Y was designed to cut ACSR cables up to 336 MCM, as well as copper cables up to 500 MCM and aluminum cables up to 1.18” outside diameter.

REC-634YC: 6.6 Ton Cutting Tool with 1-3/8” Jaw Opening

Large copper cable cutting is finally made easy with the REC-634YC – just pull the trigger and 6.6 tons immediately goes to work for you.

REC-660YC: 6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening

The REC-660YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2” maximum outside diameter.

REC-685YC: 9 Ton Scissor-Type Cutting Tool with 3.3” Jaw Opening

The REC-685YC is designed to cut copper and aluminum cables as well as lead-sheathed telecommunication cables.

REC-B105YC: 9 Ton Scissor – Type Cutting Tool

The REC-B105YC is designed to cut copper and aluminum cables as well as lead-sheathed telecommunication cables. The extremely large jaws and scissortype blades allow for easy cutting of large underground cables. The sidebar handle allows the user to stabilize and balance the tool.

REC-B630Y: 6.6 Ton Cutting Tool with 1-3/16” Jaw Opening

The REC-B630Y was designed to cut ACSR cables up to 336 MCM, as well as copper cables up to 500 MCM and aluminum cables up to 1.18” outside diameter.

REC-B634YC: 6.6 Ton Cutting Tool with 1-3/8” Jaw Opening

Large copper cable cutting is finally made easy with the REC-B634YC – just pull the trigger and 6.6 tons immediately goes to work for you.

REC-B660YC: 6.6 Ton Scissor-Type Cutting Tool with 2.5” Jaw Opening

The REC-B660YC works well for most underground aluminum cable cutting applications. It was designed to cut copper cables up to 500 MCM and aluminum up to 2” maximum outside diameter.

REC-S3550: 13 Ton Cutting Tool with 2” Jaw Opening

The REC-S3550 cuts ACSR, guy wire, wire rope, and ground rod. Powerful and portable with a 2” jaw opening. A latch-type jaw swings open to accept material to be cut.

REC-S520: 6.6 Ton Battery Powered Cutter with .75” Jaw Opening

The REC-S520 was designed to cut the toughest steel used in construction today.

REC-S524CC: 8 Ton Cutting Tool with .95” Jaw Opening

The REC-S524CC was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaw, acetylene torches and cable cutters.

REC-S524H: 8 Ton Battery Powered Cutter with .95” Jaw Opening

The REC-S524H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters.

REC-S540: 8 Ton Cutting Tool with 1.6” Jaw Opening

The REC-S540 is designed to cut up to 1590 ACSR and regular guy wires and ground rod up to 5/8”. The REC-S540 is ideal for aerial bucket work and trench operations.

REC-S620: 6.6 Ton Battery Powered Cutter with .75” Jaw Opening

The REC-S620 was designed to cut the toughest steel used in construction today.

REC-S624CC: 8 Ton Cutting Tool with .95” Jaw Opening

The REC-S624CC was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaw, acetylene torches and cable cutters.

REC-S624H: 8 Ton Battery Powered Cutter with .95” Jaw Opening

The REC-S624H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters.

REC-S640: 8 Ton Cutting Tool with 1.6” Jaw Opening

The REC-S640 is designed to cut up to 1590 ACSR and regular guy wires and ground rod up to 5/8”.

REC-SB620: 6.6 Ton Battery Powered Cutter with .75” Jaw Opening

The REC-S620 was designed to cut the toughest steel used in construction today.

REC-SB624CC: 8 Ton Cutting Tool with .95” Jaw Opening

The REC-SB624CC was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaw, acetylene torches and cable cutters.

REC-SB624H: 8 Ton Battery Powered Cutter with .95” Jaw Opening

The REC-SB624H was designed to cut the toughest steel used in construction today. It can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaws, acetylene torches and cable cutters.

REC-SB640: 8 Ton Cutting Tool with 1.6” Jaw Opening

The REC-SB640 is designed to cut up to 1590 ACSR and regular guy wires and ground rod up to 5/8”.

REC-Y33: Gear-Driven Scissor Cutter with 1.25” Jaw Opening

The REC-Y33 cable cutter is used to cut up to 636 ACSR and up to 500 MCM*
copper cables.

REC-Y33M: Gear-Driven Cable Cutter with 1.25″ Jaw Opening

The REC-Y33M is a cable cutter used to cut up to 636 ACSR and up to 500 MCM* Copper Cables.

REC-Y60ACM: Gear-Driven Cable Cutter with 2.3″ Jaw Opening

The REC-Y60ACM was designed to cut stranded copper cables and aluminum. The jaws will accept a maximum of 1500 MCM aluminum.

RI-500: Rachet Cable Cutter

The RI-500 was designed to cut up to 500 MCM copper cables. The special ergonomic handle design gives you extra leverage at the bottom and is narrowed at the top for easier handling.

S-16: S-Series Handheld Hydraulic Cutter

Huskie Tools' S-Series tools cut anything from guy wire to anchor rod and most overhead and underground cables. The S-series cutters are portable, lightweight, and made to last years under the toughest field conditions.

S-20: Handheld Hydraulic Cutter

Huskie Tools’ S-Series tools cut anything from guy wire* to anchor rod and most overhead and underground cables.

S-240: S-Series Handheld Hydraulic Cutter

Huskie Tools’ S-Series tools cut anything from guy wire* to anchor rod and most overhead and underground cables.

S-240CC: Handheld Hydraulic Cutter

Huskie Tools’ S-Series tools cut anything from guy wire* to anchor rod and most overhead and underground cables. The S-series cutters are portable, lightweight, and made to last years under the toughest field conditions.

S-32: Handheld Hydraulic Cutter

Huskie Tools’ S-Series tools cut anything from guy wire* to anchor rod and most overhead and underground cables. The S-series cutters are portable, lightweight, and made to last years under the toughest field conditions.

S-32: Handheld Hydraulic Cutter

Huskie Tools’ S-Series tools cut anything from guy wire* to anchor rod and most overhead and underground cables.