1256-H and 1258-H: Hot Sticks for ECO-Series Streamline Tools 1256-H and 1258-H: Hot Sticks for ECO-Series Streamline Tools
Huskie Tools partnered with Hastings to offer a Hotline Adapter for Hot Sticks. This adapter is exclusively for Huskie's ECO-Series Streamline battery operated tools. Available in 6 foot and 8 foot lengths, the tool can adjust to multiple positions; 0°, 30°, 60°, and 90°.
BP-80: Huskie Tools Lithium-Ion Battery BP-80: Huskie Tools Lithium-Ion Battery
The BP-80, Lithium-Ion Battery, is now the battery of choice for all of your Huskie Tools products.
BP-80TG: Battery Test Gauge BP-80TG: Battery Test Gauge
The BP-80TG is a battery test gauge for the BP-80 Lithium Ion Battery. It is sold as a stand alone accessory.
BP-82: Lithium-Ion Battery BP-82: Lithium-Ion Battery
The BP-82 can be charged with any of the Huskie Lithium Ion chargers, including the CH-80, CH-90 & CH-94.
BP-84: Lithium-Ion Battery BP-84: Lithium-Ion Battery
The BP-84 can be charged with any of the Huskie Lithium Ion chargers including the CH-80, CH-90 & CH-94.
CH-90: Tri-Chemistry Charger CH-90: Tri-Chemistry Charger
The CH-90 is a Tri-Chemistry charger able to charge the BP-80 and all previous Huskie Tool Batteries.
CH-94: Lithium Ion Charger CH-94: Lithium Ion Charger
The CH-94 is a Lithium Ion only charger able to charge the BP-80 and the BP-82 & BP-84.
CH-ACC: AC Charger Cord CH-ACC: AC Charger Cord
AC Charger Cord for CH-90
CH-DCC: DC Charger Cord for CH-90 CH-DCC: DC Charger Cord for CH-90
DC Charger Cord for CH-90
CN-258: 6 Ton Compression Tool with Rubber Boot – .95” Jaw Opening CN-258: 6 Ton Compression Tool with Rubber Boot – .95” Jaw Opening
Huskie’s CN-258 is used for service entrance connections up to 4/0, and its bypass cartridge assures all compressions. A two-stage, rapid advance pumping system and threaded collar save compression strokes and time.
CN-58H: 6 Ton Remote Compression C-Head with Rubber Boot – .95” Jaw Opening CN-58H: 6 Ton Remote Compression C-Head with Rubber Boot – .95” Jaw Opening
The CN-58H remote operated “C” head requires an external pumping source of 10,000 psi.
DA-12: Hydraulic Low Pressure 4″ Cable Cutter DA-12: Hydraulic Low Pressure 4″ Cable Cutter
The DA-12 hydraulic hand-held, cable cutter can be operated directly from the utility line truck. At 2,500 psi pressure it can cut four-inch lead sheath cables as well as 4200 pair communications cables.
ECO-336: 6 Ton Battery Powered Streamline Cutting Tool ECO-336: 6 Ton Battery Powered Streamline Cutting Tool
The ECO-336 streamline battery powered cutting tools have a powerful 6 ton output for handling the most difficult of tasks.
ECO-336A: 6 Ton Battery Powered Streamline Cutting Tool ECO-336A: 6 Ton Battery Powered Streamline Cutting Tool
The ECO-336 streamline battery powered cutting tools have a powerful 6 ton output for handling the most difficult of tasks.
ECO-EZ: 6 Ton Compression Tool with Changeable Head ECO-EZ: 6 Ton Compression Tool with Changeable Head
The ECO-EZ Streamline compression tool has a powerful 6 ton output. When ordering, choose from any of the six available heads that meet your needs which will be installed at the factory. If multiple jaws are needed they can be replaced fairly simply by removing the snap ring on pin. The swivel head design allows the jaws to rotate to 180° for operator convenience.
ECO-EZBG: 6 Ton Compression Tool with Changeable Head ECO-EZBG: 6 Ton Compression Tool with Changeable Head
The ECO-EZBG Streamline compression tool has a powerful 6 ton output. When ordering, choose from any of the six available heads that meet your needs and switch between multiple heads with the pull-pin design.
ECO-EZHBAG ECO-EZHBAG
Carry tools and accessories with the ECOEZHBAG. The bag is made of weather resistant vinyl and has two Velcro® closures. Large pockets on the outside hold extra accessories.
ECO-EZK: 6 Ton Compression Tool with Changeable Head ECO-EZK: 6 Ton Compression Tool with Changeable Head
The ECO-EZK streamline compression tool has a powerful 6-ton output. When ordering choose from any of the six available heads that meet your needs.
ECO-EZND: 6 Ton Compression Tool with Changeable Head ECO-EZND: 6 Ton Compression Tool with Changeable Head
The ECO-EZND streamline compression tool has a powerful 6-ton output. When ordering chose from any of the six available heads that meet your needs.
ECO-EZO: 6 Ton Compression Tool with Changeable Head ECO-EZO: 6 Ton Compression Tool with Changeable Head
The ECO-EZO streamline compression tool has a powerful 6-ton output. When ordering chose from any of the four available heads that meet your needs.
ECO-L90: LED Light ECO-L90: LED Light
The ECO-L90 has 90 LED lights to brighten up any work area. The lightweight design and top hook allows the light to be hung overhead.
EP- 430: 12 Ton Compression Tool with Rubber Boot – 1-3/16” Jaw Opening EP- 430: 12 Ton Compression Tool with Rubber Boot – 1-3/16” Jaw Opening
The EP-430 is unique in that it has a large jaw opening of 1-3/16” and is able to splice up to 600 MCM.
EP- 430H: 12 Ton Remote Compression C-Head with Rubber Boot – 1-3/16” Jaw Opening EP- 430H: 12 Ton Remote Compression C-Head with Rubber Boot – 1-3/16” Jaw Opening
The EP-430H is a remote C-head that requires an external 10,000 psi pumping source for operation.
EP-100WD: 100 Ton Compression Head EP-100WD: 100 Ton Compression Head
The EP-100WD is a 100 Ton compression head for full tension, transmission and substation connections and requires an external 10,000 psi, double-acting pumping source. The EP-100WD is even lighter than our previous model, the EP-100WC, by a full 18 pounds.
EP-410: 12 Ton Compression Tool with Rubber Boot –  1” Jaw Opening EP-410: 12 Ton Compression Tool with Rubber Boot – 1” Jaw Opening
The EP-410, hand operated, compression tool features a two stage rapid advance pumping system.
EP-410H: 12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening EP-410H: 12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening
The EP-410H is a traditional C-head with a one-inch jaw opening. It will accept all “U” type dies currently used in 12 ton tools on today’s market.
EP-410HT: 12 Ton Remote Titanium Compression C-Head – 1” Jaw Opening EP-410HT: 12 Ton Remote Titanium Compression C-Head – 1” Jaw Opening
The unique, lightweight titanium head of the EP-410HT reduces its weight to just five pounds.
EP-510C: 12 Ton Compression Tool with Rubber Boot – 1.65” Jaw Opening EP-510C: 12 Ton Compression Tool with Rubber Boot – 1.65” Jaw Opening
Huskie’s EP-510C was engineered to accommodate all U-type dies currently used in existing 12 ton tools.
EP-510HC: 12 Ton Remote Compression C-Head with Rubber Boot – 1.65” Jaw Opening EP-510HC: 12 Ton Remote Compression C-Head with Rubber Boot – 1.65” Jaw Opening
The EP-510HC is a remote C-head that requires an external 10,000 psi pumping source.
EP-510HK: 12 Ton Remote Compression C-Head with Rubber Boot – 1.5” Jaw Opening EP-510HK: 12 Ton Remote Compression C-Head with Rubber Boot – 1.5” Jaw Opening
The EP-510HK is a Kearney style tool which accepts PH-2, WH-2, and WH-3 style dies.
EP-510K: 12 Ton Compression Tool with Rubber Boot – 1.5” Jaw Opening EP-510K: 12 Ton Compression Tool with Rubber Boot – 1.5” Jaw Opening
The Huskie EP-510K was designed to accept Kearney dies commonly used in their models WH-2, PH-2, and WH-3 hydraulic tools.
EP-60D (Steel) – 60 Ton Double Acting Compression Head EP-60D (Steel) – 60 Ton Double Acting Compression Head
The EP-60D series is a double acting model. Double acting tools will eliminate the possibility of the tool jamming.
EP-60DT (Titanium): 60 Ton Double Acting Compression Head EP-60DT (Titanium): 60 Ton Double Acting Compression Head
The EP-60D series is a double acting model. Double acting tools will eliminate the possibility of the tool jamming.
EP-60WA (Steel) – 60 Ton Compression Head EP-60WA (Steel) – 60 Ton Compression Head
The EP-60WA is a single acting, 60 ton press that is designed to compress sleeves and lugs on ACSR and ACAR transmission and distribution cables.
EP-60WT (Titanium) – 60 Ton Compression Head EP-60WT (Titanium) – 60 Ton Compression Head
The EP-60WT is a single acting, 60 ton press that is designed to compress sleeves and lugs on ACSR and ACAR transmission and distribution cables.
EP-610H: 15 Ton Remote Compression C-Head – 2” Jaw Opening EP-610H: 15 Ton Remote Compression C-Head – 2” Jaw Opening
The EP-610H is a remote C-head that requires an external 10,000 psi pumping source.
EP-630A: 6.2 Ton Dieless Crimping Tool –  .9” Jaw Opening EP-630A: 6.2 Ton Dieless Crimping Tool – .9” Jaw Opening
The EP-630A is commonly used by electric utilities and contractors who prefer dieless compression to circumferential compression.
EP-630HA: 6.2 Ton Dieless Remote Crimping Head with Rubber Boot – .9” Jaw Opening EP-630HA: 6.2 Ton Dieless Remote Crimping Head with Rubber Boot – .9” Jaw Opening
The EP-630HA is a dieless remote head that requires an external 10,000 psi pumping source.
EP-750A: 6.2 Ton Flip-Top Dieless Crimping Tool – with 1.5” Jaw Opening EP-750A: 6.2 Ton Flip-Top Dieless Crimping Tool – with 1.5” Jaw Opening
The EP-750A operates the same as the EP-630A, but has a larger connector/ cable capacity.
EP-750HA: 6.2 Ton Flip-Top Dieless Remote Crimping Head – 1.5” Jaw Opening EP-750HA: 6.2 Ton Flip-Top Dieless Remote Crimping Head – 1.5” Jaw Opening
The Huskie EP-750HA dieless, Anderson style head has a flip-top opening and a pull-pin locking mechanism to accept larger connectors up to 750 MCM.
EZ-HLSTR: Huskie Tools Holster EZ-HLSTR: Huskie Tools Holster
Order your own Huskie Holster, the EZHLSTR/SL-HLSTR, to carry your ECO-EZ, SL tool or any manual hydraulic tool!
EZBG EZBG
Optional crimping jaw for ECO-EZ tool.
EZK EZK
Optional crimping jaw for ECO-EZ tool.
EZND EZND
Optional crimping jaw for ECO-EZ tool.
EZO EZO
Optional crimping jaw for ECO-EZ tool.
FP-700: 10,000 psi Hydraulic Foot Pump FP-700: 10,000 psi Hydraulic Foot Pump
The FP-700 a portable, tough, hydraulic steel pump that has two speed pumping pistons for rapid advance and an external adjustable pressure setting from 4,000 to 10,000 psi output.
FS-14: Foot Switch FS-14: Foot Switch
The FS-14 was designed to replace our pendant hand control on pump models R-14EF, R-14EA, R-14EAD and REC-P1.
HP-700: 10,000 psi Hydraulic Hand Pump HP-700: 10,000 psi Hydraulic Hand Pump
The HP-700 a portable, tough, hydraulic steel pump that has two speed pumping pistons for rapid advance and an external adjustable pressure setting from 4,000 to 10,000 psi output.
HPG-4: 6 HP, Gas Engine 10,000 psi Hydraulic Pump HPG-4: 6 HP, Gas Engine 10,000 psi Hydraulic Pump
The HPG-4 is a self-contained high pressure pump, with manual operation. It is equipped with a 4 HP Briggs & Stratton engine.
HPM-P3: 5.5 Horsepower Gas Engine, 10,000 psi Hydraulic Pump HPM-P3: 5.5 Horsepower Gas Engine, 10,000 psi Hydraulic Pump
The HPM-P3 is a self-contained high pressure pump, with manual operation. It is equipped with a 5.5 HP Honda engine.