BP-80: Huskie Tools Lithium-Ion Battery BP-80: Huskie Tools Lithium-Ion Battery
The BP-80, Lithium-Ion Battery, is now the battery of choice for all of your Huskie Tools products.
BP-80TG: Battery Test Gauge BP-80TG: Battery Test Gauge
The BP-80TG is a battery test gauge for the BP-80 Lithium Ion Battery. It is sold as a stand alone accessory.
BP-82: Lithium-Ion Battery BP-82: Lithium-Ion Battery
The BP-82 can be charged with any of the Huskie Lithium Ion chargers, including the CH-80, CH-90 & CH-94.
BP-84: Lithium-Ion Battery BP-84: Lithium-Ion Battery
The BP-84 can be charged with any of the Huskie Lithium Ion chargers including the CH-80, CH-90 & CH-94.
CH-90: Tri-Chemistry Charger CH-90: Tri-Chemistry Charger
The CH-90 is a Tri-Chemistry charger able to charge the BP-80 and all previous Huskie Tool Batteries.
CH-94: Lithium Ion Charger CH-94: Lithium Ion Charger
The CH-94 is a Lithium Ion only charger able to charge the BP-80 and the BP-82 & BP-84.
CH-ACC: AC Charger Cord CH-ACC: AC Charger Cord
AC Charger Cord for CH-90
CH-DCC: DC Charger Cord for CH-90 CH-DCC: DC Charger Cord for CH-90
DC Charger Cord for CH-90
CN-258: 6 Ton Compression Tool with Rubber Boot – .95” Jaw Opening CN-258: 6 Ton Compression Tool with Rubber Boot – .95” Jaw Opening
Huskie’s CN-258 is used for service entrance connections up to 4/0, and its bypass cartridge assures all compressions. A two-stage, rapid advance pumping system and threaded collar save compression strokes and time.
CN-58H: 6 Ton Remote Compression C-Head with Rubber Boot – .95” Jaw Opening CN-58H: 6 Ton Remote Compression C-Head with Rubber Boot – .95” Jaw Opening
The CN-58H remote operated “C” head requires an external pumping source of 10,000 psi.
ECO-EZHBAG ECO-EZHBAG
Carry tools and accessories with the ECOEZHBAG. The bag is made of weather resistant vinyl and has two Velcro® closures. Large pockets on the outside hold extra accessories.
ECO-L90: LED Light ECO-L90: LED Light
The ECO-L90 has 90 LED lights to brighten up any work area. The lightweight design and top hook allows the light to be hung overhead.
ECO-R13: 6 Ton Battery Powered Cutters ECO-R13: 6 Ton Battery Powered Cutters
The ECO-R13 is designed to cut the toughest steel used in construction today. This tool can replace an entire tool kit, including several sizes of conventional bolt cutters, hacksaw, acetylene torches and cable cutters. The ECO-R13 is designed as a inline style cutter with an open “C” jaw that can cut up to 1/2” rebar The ECO-R13 comes with a Lithium-Ion battery and rapid charger. The cutting blades on this tool can be rotated when dull and replaced as necessary.
EP- 430: 12 Ton Compression Tool with Rubber Boot – 1-3/16” Jaw Opening EP- 430: 12 Ton Compression Tool with Rubber Boot – 1-3/16” Jaw Opening
The EP-430 is unique in that it has a large jaw opening of 1-3/16” and is able to splice up to 600 MCM.
EP- 430H: 12 Ton Remote Compression C-Head with Rubber Boot – 1-3/16” Jaw Opening EP- 430H: 12 Ton Remote Compression C-Head with Rubber Boot – 1-3/16” Jaw Opening
The EP-430H is a remote C-head that requires an external 10,000 psi pumping source for operation.
EP-410: 12 Ton Compression Tool with Rubber Boot –  1” Jaw Opening EP-410: 12 Ton Compression Tool with Rubber Boot – 1” Jaw Opening
The EP-410, hand operated, compression tool features a two stage rapid advance pumping system.
EP-410H: 12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening EP-410H: 12 Ton Remote Compression C-Head with Rubber Boot – 1” Jaw Opening
The EP-410H is a traditional C-head with a one-inch jaw opening. It will accept all “U” type dies currently used in 12 ton tools on today’s market.
EP-410HT: 12 Ton Remote Titanium Compression C-Head – 1” Jaw Opening EP-410HT: 12 Ton Remote Titanium Compression C-Head – 1” Jaw Opening
The unique, lightweight titanium head of the EP-410HT reduces its weight to just five pounds.
EP-510C: 12 Ton Compression Tool with Rubber Boot – 1.65” Jaw Opening EP-510C: 12 Ton Compression Tool with Rubber Boot – 1.65” Jaw Opening
Huskie’s EP-510C was engineered to accommodate all U-type dies currently used in existing 12 ton tools.
EP-510HC: 12 Ton Remote Compression C-Head with Rubber Boot – 1.65” Jaw Opening EP-510HC: 12 Ton Remote Compression C-Head with Rubber Boot – 1.65” Jaw Opening
The EP-510HC is a remote C-head that requires an external 10,000 psi pumping source.
EP-510HK: 12 Ton Remote Compression C-Head with Rubber Boot – 1.5” Jaw Opening EP-510HK: 12 Ton Remote Compression C-Head with Rubber Boot – 1.5” Jaw Opening
The EP-510HK is a Kearney style tool which accepts PH-2, WH-2, and WH-3 style dies.
EP-510K: 12 Ton Compression Tool with Rubber Boot – 1.5” Jaw Opening EP-510K: 12 Ton Compression Tool with Rubber Boot – 1.5” Jaw Opening
The Huskie EP-510K was designed to accept Kearney dies commonly used in their models WH-2, PH-2, and WH-3 hydraulic tools.
EP-60D (Steel) – 60 Ton Double Acting Compression Head EP-60D (Steel) – 60 Ton Double Acting Compression Head
The EP-60D series is a double acting model. Double acting tools will eliminate the possibility of the tool jamming.
EP-60DT (Titanium): 60 Ton Double Acting Compression Head EP-60DT (Titanium): 60 Ton Double Acting Compression Head
The EP-60D series is a double acting model. Double acting tools will eliminate the possibility of the tool jamming.
EP-60WA (Steel) – 60 Ton Compression Head EP-60WA (Steel) – 60 Ton Compression Head
The EP-60WA is a single acting, 60 ton press that is designed to compress sleeves and lugs on ACSR and ACAR transmission and distribution cables.
EP-60WT (Titanium) – 60 Ton Compression Head EP-60WT (Titanium) – 60 Ton Compression Head
The EP-60WT is a single acting, 60 ton press that is designed to compress sleeves and lugs on ACSR and ACAR transmission and distribution cables.
EP-610H: 15 Ton Remote Compression C-Head – 2” Jaw Opening EP-610H: 15 Ton Remote Compression C-Head – 2” Jaw Opening
The EP-610H is a remote C-head that requires an external 10,000 psi pumping source.
EP-630A: 6.2 Ton Dieless Crimping Tool –  .9” Jaw Opening EP-630A: 6.2 Ton Dieless Crimping Tool – .9” Jaw Opening
The EP-630A is commonly used by electric utilities and contractors who prefer dieless compression to circumferential compression.
EP-630HA: 6.2 Ton Dieless Remote Crimping Head with Rubber Boot – .9” Jaw Opening EP-630HA: 6.2 Ton Dieless Remote Crimping Head with Rubber Boot – .9” Jaw Opening
The EP-630HA is a dieless remote head that requires an external 10,000 psi pumping source.
EP-750A: 6.2 Ton Flip-Top Dieless Crimping Tool – with 1.5” Jaw Opening EP-750A: 6.2 Ton Flip-Top Dieless Crimping Tool – with 1.5” Jaw Opening
The EP-750A operates the same as the EP-630A, but has a larger connector/ cable capacity.
EP-750HA: 6.2 Ton Flip-Top Dieless Remote Crimping Head – 1.5” Jaw Opening EP-750HA: 6.2 Ton Flip-Top Dieless Remote Crimping Head – 1.5” Jaw Opening
The Huskie EP-750HA dieless, Anderson style head has a flip-top opening and a pull-pin locking mechanism to accept larger connectors up to 750 MCM.
EZ-HLSTR: Huskie Tools Holster EZ-HLSTR: Huskie Tools Holster
Order your own Huskie Holster, the EZHLSTR/SL-HLSTR, to carry your ECO-EZ, SL tool or any manual hydraulic tool!
FP-700: 10,000 psi Hydraulic Foot Pump FP-700: 10,000 psi Hydraulic Foot Pump
The FP-700 a portable, tough, hydraulic steel pump that has two speed pumping pistons for rapid advance and an external adjustable pressure setting from 4,000 to 10,000 psi output.
FS-14: Foot Switch FS-14: Foot Switch
The FS-14 was designed to replace our pendant hand control on pump models R-14EF, R-14EA, R-14EAD and REC-P1.
HP-700: 10,000 psi Hydraulic Hand Pump HP-700: 10,000 psi Hydraulic Hand Pump
The HP-700 a portable, tough, hydraulic steel pump that has two speed pumping pistons for rapid advance and an external adjustable pressure setting from 4,000 to 10,000 psi output.
HPG-4: 6 HP, Gas Engine 10,000 psi Hydraulic Pump HPG-4: 6 HP, Gas Engine 10,000 psi Hydraulic Pump
The HPG-4 is a self-contained high pressure pump, with manual operation. It is equipped with a 4 HP Briggs & Stratton engine.
HPM-P3: 5.5 Horsepower Gas Engine, 10,000 psi Hydraulic Pump HPM-P3: 5.5 Horsepower Gas Engine, 10,000 psi Hydraulic Pump
The HPM-P3 is a self-contained high pressure pump, with manual operation. It is equipped with a 5.5 HP Honda engine.
HT-Series: Dies for 4-6 Ton Tools HT-Series: Dies for 4-6 Ton Tools
HT-Series dies are equivalent to Kearney "O" Type Dies for 4-6 Ton Tools.
HT41-Series:Dies for 12 Ton Tools HT41-Series:Dies for 12 Ton Tools
Dies for 12 ton tools
HTK-Series: Dies for 10.7 & 12 Ton Tools HTK-Series: Dies for 10.7 & 12 Ton Tools
HTK-Series: Dies for 10.7 & 12 Ton Tools
Hydraulic Oil Hydraulic Oil
It is our own MV-32 clear hydraulic fluid and can be used in all of our hydraulic products.
NC-SERIES: 10,000 psi High Pressure Hydraulic Hose NC-SERIES: 10,000 psi High Pressure Hydraulic Hose
Our high pressure, non-conductive NC-SERIES hoses and couplers are rated at 10,000 psi working pressure.
PG-15: Gauge for 6 ton tools PG-15: Gauge for 6 ton tools
The PG-15 is designed to check pressure on all Huskie 6 ton hydraulic tools.
PG-1: Gauge to test pump output pressure PG-1: Gauge to test pump output pressure
The PG-1, in line pressure gauge has standard 3/8” couplers and a 10,000 psi indicator.
PG-4: Gauge for 12 ton tools PG-4: Gauge for 12 ton tools
The PG-4 gauge is used to calibrate 12 ton output tools.
PG-58: Internal pressure gauge for pistol grip tools PG-58: Internal pressure gauge for pistol grip tools
The PG-58 is designed to check internal pressure on all pistol grip style battery operated tools.
PG-610A: Gauge to calibrate 12 and 15 ton tools PG-610A: Gauge to calibrate 12 and 15 ton tools
The PG-610A gauge is used to calibrate 12 & 15 ton output tools.
PG-ND: Gauge for ECO-EZ and REC-5NDSL tools PG-ND: Gauge for ECO-EZ and REC-5NDSL tools
The PG-ND gauge is used to calibrate the ECO-EZ Series tools, as well as the RECND tools.
PG-SL: Gauge for SL-ND tools PG-SL: Gauge for SL-ND tools
The PG-SL is for SL-ND tools with pull-pin.
PU-15: “U” Die Adapter PU-15: “U” Die Adapter
The PU-15 is a “U” die adapter for our 15 ton compression tools.